What if there is noise in the automatic noodle production machine?

What about the noise of automatic noodle production machine? Due to the dry weather and other reasons, our machine will have all kinds of small problems, and all we can do is take good care of it. Automatic noodle production machine is no exception. After using the automatic noodle production machine for a period of time, the equipment has problems due to various reasons.

What about noise? How to deal with it? Here is a detailed introduction for you.

1. If there is a lot of lubrication between the bearing and the bearing, it is not necessary to replace the bearing when it is found that the bearing is damaged.

2. Check whether the reduction gear is damaged. Open the reducer cover and observe each stage of gear. If it is damaged, replace the damaged gear.

3. Check whether the gearbox grease is too little. If it is too little, increase the gearbox grease appropriately and check whether the commutator is seriously worn. If damaged, replace and check the motor rotor for open circuit. Turn on the brush and measure the resistance between the two commutators. When the resistance between the two groups of commutators is large, it indicates that there is a slight phenomenon in the winding. Generally speaking, when replacing the rotor, it is troublesome to rewind the rotor。